Solvents Australia 3M Specialty Fluids

3M™ Fluorinert™ Electronic Liquid FC-3283 This fully-fluorinated liquid is ideal for use in many single- phase heat transfer applications, especially in the semiconductor manufacturing industry. Application Guide Listed below are key applications for FC-3283. Do

Heat Transfer Fluids With a convenient liquid range (-50°C to 128°C), Fluorinert liquid FC-3283 is well-suited to a variety of semiconductor manufacturing heat transfer applications, such as etchers, ion implanters, testers and more.

Technical Data Sheet

3M™ Fluorinert™ Electronic Liquid FC-3284 FC-3284 is used in many single phase heat transfer applications in semiconductor and other manufacturing industries. Technical Data Sheet

3M™ Fluorinert™ Electronic Liquid FC-40 This fully-fluorinated liquid is ideal for use in many single-phase heat transfer applications - especially in the semiconductor manufacturing industry - and is widely used in testing applications. Application Guide Listed below are key applications for FC-40.

Heat Transfer Fluids For heat transfer applications that require a higher boiling point than 3M™ Fluorinert™ Electronic Liquid FC-3283, Fluorinert liquid FC-40 (155°C boiling point) is an ideal choice. It is well-suited to a variety of heat transfer applications - especially in the electronics industry. The high dielectric strength and wide liquid range of Fluorinert liquid FC-40 allows its use in a variety of testing applications, including electronic reliability, hermetic seal/gross leak, and thermal shock testing. Hermetic seal/gross leak testing generally follows Military Standards 883-1014, 750-1071 and 202-112; FC-40 liquid conforms to these standards. Thermal shock testing generally uses Military Standard 883-1011 specifications; FC-40 liquid also conforms to these specifications.

Testing Fluids Technical Data Sheet

3M™ Fluorinert™ Electronic Liquid FC-43 A unique combination of properties makes Fluorinert liquid FC- 43 ideal for many electronics applications, including heat transfer, vapor phase reflow soldering, and many electronic quality and reliability tests. Application Guide Listed below are key applications for FC-43.

Heat Transfer Fluids Its wide liquid range (-50°C to 174°C) and non-conductivity make Fluorinert liquid FC-43 well-suited to a variety of heat transfer applications - especially in the electronics industry. In addition, it is thermally and chemically stable, compatible with sensitive materials, nonflammable and practically non-toxic. It's an ideal thermal management fluid for applications such as etchers, ion implanters, testers and more. The high dielectric strength and wide liquid range of Fluorinert liquid FC-40 allows its use in a variety of testing applications, including electronic reliability, hermetic seal/gross leak, and thermal shock testing. Hermetic seal/gross leak testing generally follows Military Standards 883-1014, 750-1071 and 202-112; FC-40 liquid conforms to these standards. Thermal shock testing generally uses Military Standard 883-1011 specifications; FC-40 liquid also conforms to these specifications. Fluorinert liquid FC-43 is typically used with solders like 70 Sn/18 Pb/12 In, 100 In, 58 Sn/42 In, or 58 Bi/42 Sn. FC-43 liquid can be used in a variety of vapor phase reflow soldering applications, including: • BGA attach • Conventional through-hole or SMT circuit assembly reflow • Fluxless fusion of circuit board electroplating • Assembly of metal components having complex geometric shapes

Testing Fluids

Vapor Phase Reflow Soldering Fluids

3M™ Fluorinert™ Electronic Liquid FC-43 A unique combination of properties makes Fluorinert liquid FC- 43 ideal for many electronics applications, including heat transfer, vapor phase reflow soldering, and many electronic quality and reliability tests. Application Guide Listed below are key applications for FC-43.

Heat Transfer Fluids Its wide liquid range (-50°C to 174°C) and non-conductivity make Fluorinert liquid FC-43 well-suited to a variety of heat transfer applications - especially in the electronics industry. In addition, it is thermally and chemically stable, compatible with sensitive materials, nonflammable and practically non-toxic. It's an ideal thermal management fluid for applications such as etchers, ion implanters, testers and more. The high dielectric strength and wide liquid range of Fluorinert liquid FC-40 allows its use in a variety of testing applications, including electronic reliability, hermetic seal/gross leak, and thermal shock testing. Hermetic seal/gross leak testing generally follows Military Standards 883-1014, 750-1071 and 202-112; FC-40 liquid conforms to these standards. Thermal shock testing generally uses Military Standard 883-1011 specifications; FC-40 liquid also conforms to these specifications. Fluorinert liquid FC-43 is typically used with solders like 70 Sn/18 Pb/12 In, 100 In, 58 Sn/42 In, or 58 Bi/42 Sn. FC-43 liquid can be used in a variety of vapor phase reflow soldering applications, including: • BGA attach • Conventional through-hole or SMT circuit assembly reflow • Fluxless fusion of circuit board electroplating • Assembly of metal components having complex geometric shapes

Testing Fluids

Vapor Phase Reflow Soldering Fluids Technical Data Sheet

3M™ Fluorinert™ Electronic Liquid FC-43 A unique combination of properties makes Fluorinert liquid FC- 43 ideal for many electronics applications, including heat transfer, vapor phase reflow soldering, and many electronic quality and reliability tests. Application Guide Listed below are key applications for FC-43.

Heat Transfer Fluids

Testing Fluids

Vapor Phase Reflow Soldering Fluids

3M™ Fluorinert™ Electronic Liquid FC-70 A unique combination of properties and a high boiling point (215 °C) makes this liquid ideal for many electronics applications, including high temperature heat transfer, vapor phase reflow soldering and many electronic quality and reliability tests. Application Guide Listed below are key applications for FC-70.

Heat Transfer Fluids The high boiling point of Fluorinert liquid FC-70 (215°C) and its excellent heat transfer properties make it an ideal fluid for use in high temperature thermal management applications. Also, its high dielectric constant means it will not damage electronic equipment or semiconductor wafers in the event of a leak or other failure. FC-70 liquid is chemically stable, compatible with sensitive materials, nonflammable and practically non-toxic. The high dielectric strength and wide liquid range (-25°C to 215°C) of Fluorinert liquid FC-70 make it an ideal liquid for use in electronic reliability testing. Components may be tested both physically and electronically while immersed in this non-conductive liquid. In addition, tested devices dry quickly with no residue, and require no post-test cleaning. The saturated vapor generated from boiling Fluorinert liquid FC-70 is very dense and easily contained. The fluid is typically used with solders like 63 Sn/37 Pb, 60 Sn/40 Pb, or 62 Sn/36 Pb/2 Ag. FC-70 liquid can be used in a variety of vapor phase reflow soldering applications, including: • BGA attach • Conventional through-hole or SMT circuit assembly reflow • Fluxless fusion of circuit board electroplating • Assembly of metal components having complex geometric shapes

Testing Fluids

Vapor Phase Reflow Soldering Fluids Technical Data Sheet

3M™ Fluorinert™ Electronic Liquid FC-43 A unique combination of properties makes Fluorinert liquid FC- 43 ideal for many electronics applications, including heat transfer, vapor phase reflow soldering, and many electronic quality and reliability tests. Application Guide Listed below are key applications for FC-43.

Heat Transfer Fluids

Testing Fluids

3M™ Fluorinert™ Electronic Liquid FC-72 Thermally and chemically stable, Fluorinert liquid FC-72 is an ideal choice for low temperature heat transfer applications. Its properties also make it useful in selected electronic testing applications. Application Guide Listed below are key applications for FC-72.

Heat Transfer Fluids With a pour point of -90°C and excellent low temperature viscosity, Fluorinert liquid FC-72 is an ideal fluid for use in low temperature heat transfer applications. Its high dielectric constant also means that it will not damage electronic equipment in the event of a leak or other failure. FC-72 liquid is chemically stable, compatible with sensitive materials, nonflammable and practically non-toxic The high dielectric strength and wide liquid range of Fluorinert liquid FC-72 allows its use in a variety of testing applications, including electronic reliability and hermetic seal/gross leak, and thermal shock testing. Hermetic seal/gross leak testing generally follows Military Standards 883-1014, 750-1071 and 202-112; FC-72 liquid conforms to these specifications.

Testing Fluids Technical Data Sheet

3M™ Fluorinert™ Electronic Liquid FC-43 A unique combination of properties makes Fluorinert liquid FC- 43 ideal for many electronics applications, including heat transfer, vapor phase reflow soldering, and many electronic quality and reliability tests. Application Guide Listed below are key applications for FC-43.

Heat Transfer Fluids

Testing Fluids

3M™ Fluorinert™ Electronic Liquid FC-84 With high thermal conductivity and excellent chemical stability, Fluorinert liquid FC-84 is ideal for use in many electronics applications, including heat transfer and electronic reliability testing. Application Guide Listed below are key applications for FC-84.

Heat Transfer Fluids Fluorinert liquid FC-84 has excellent thermal conductivity and viscosity performance over a range of temperatures. Its wide liquid range (-95°C to 80°C) makes it useful in an array of thermal management applications. And its high dielectric constant ensures that it will not damage electronic equipment in the event of a leak or other failure. FC-84 liquid is chemically stable, compatible with sensitive materials, nonflammable and practically non-toxic. Fluorinert liquid FC-84 conforms to Military Specification 883 as a detector fluid in bubble tank or negative ion detection (NID) gross leak testing with reliability confirmable to 10-5 atmospheres per cc/sec or more. It is also an effective fluid for use in environmental stress screening.

Testing Fluids Technical Data Sheet

3M™ Fluorinert™ Electronic Liquid FC-43 A unique combination of properties makes Fluorinert liquid FC- 43 ideal for many electronics applications, including heat transfer, vapor phase reflow soldering, and many electronic quality and reliability tests. Application Guide Listed below are key applications for FC-43.

Heat Transfer Fluids

3M™Novec™ EGC-1700 Electronic Coating This coating is easy to apply and dries to a thin transparent film. The low surface energy film repels liquids such as lubricating oils, silicones and photoresist solutions used in the manufacturing of semiconductors. This coating requires no masking in most applications, and it air-dries in seconds. • Features and Benefits Dries to a thin transparent film Excellent anti-wetting, anti-stiction, anti-migration and anti-corrosion properties Easy to apply Requires no masking in most applications Air-dries in seconds

Product Details This coating can be used in the disk drive, MEMS, LCD and printed circuit board industries to provide anti-wetting, anti-stiction, anti-migration and anti- corrosion properties. It is a replacement for Fluorad™ coating FC-722, FC- 724, FC-725 and FC-732. When applied to clean, moisture-free surfaces such as copper, aluminum, ceramic, steel, tin or glass, Novec coating EGC-1700 dries to a thin transparent film with excellent anti-wetting, anti-stiction, anti-migration and anti-corrosion properties. This makes it useful as a coating for a variety of applications, including: • Printed circuit boards MR heads Micro motors Ball bearing tracks MEMS Ink jet print cartridges Various hard disk drive components TFT-LCD The low surface energy film repels liquids such as lubricating oils, silicones and photoresist solutions used in the manufacturing of semiconductors. What's more, Novec coating EGC-1700 is easy to apply, requires no masking in most applications, and air-dries in seconds.

Technical Data Sheet

3M™ Fluorinert™ Electronic Liquid FC-43 A unique combination of properties makes Fluorinert liquid FC- 43 ideal for many electronics applications, including heat transfer, vapor phase reflow soldering, and many electronic quality and reliability tests. Application Guide Listed below are key applications for FC-43.

Heat Transfer Fluids

3M™Novec™ EGC-1704 Electronic Coating This coating can be used in the disk drive, MEMS and TFT-LCD industries to provide anti-wetting, anti-stiction, anti-migration and anti-corrosion properties. Novec electronic coating EGC-1704 imparts anti-wetting, anti-stiction, anti- migration and anti-corrosion properties to sensitive electronic components. When spray-applied or dip-coated to clean, moisture-free surfaces such as copper, aluminum, ceramic, steel, tin or glass, Novec coating EGC-1704 dries to form an ultra-thin transparent film (~0.2 micron) that repels liquids such as lubricating oils, hydrocarbon oils and silicones. The coating can be used to protect electrical components such as: • MR recording heads • Spindle motors • Head gimbal assemblies(HGAs) • MEMS • CRTs • LCDs And, to ensure the minimum amount of contaminants, the coating's carrier solvent - 3M™ Novec™ Engineered Fluid HFE-7100DL - is a high purity product ideal for electronics applications. Technical Data Sheet

3M™ Fluorinert™ Electronic Liquid FC-43 A unique combination of properties makes Fluorinert liquid FC- 43 ideal for many electronics applications, including heat transfer, vapor phase reflow soldering, and many electronic quality and reliability tests. Application Guide Listed below are key applications for FC-43.

Heat Transfer Fluids

Testing Fluids

Vapor Phase Reflow Soldering Fluids

3M™Novec™ 649 Engineered Fluid 3M™ Novec™ 649 Engineered Fluid is an advanced heat transfer fluid, balancing customer needs for physical, thermal and electrical properties, with desirable environmental properties. Novec 649 fluid is an effective heat transfer fluid with a boiling point of 49°C. Novec 649 fluid is useful in heat transfer particularly where non-flammability or environmental factors are a consideration. Application Guide Listed below are key applications for 649. Organic Rankine Cycle • Diesel Engines • Generators • Geothermal Applications • Solar Applications Organic Rankine Cycle • Power Electronics such as IGBTs or inverters • Transformers and other equipment (SF6 replacement) Features • Outstanding environmental properties • GWP of 1 • Non-ozone depleting • 5-day atmospheric lifetime • Large margin of safety in use • Low viscosity • High molecular weight • Low pour point

Typical Applications

Computer/Data Center Cooling Technical Data Sheet

A unique combination of properties makes Fluorinert liquid FC- 43 ideal for many electronics applications, including heat transfer, vapor phase reflow soldering, and many electronic quality and reliability tests. Application Guide Listed below are key applications for FC-43.

Heat Transfer Fluids

Vapor Phase Reflow Soldering Fluids

3M™Novec™ 71DA Engineered Fluid Novec fluid 71DA is a true azeotrope, with constant vapor and liquid composition at its boiling point. It is intended to replace ozone-depleting materials in many applications as well as certain aqueous cleaning processes. Application Guide Listed below are key applications for 71DA. 71DA fluid is a hydrofluoroether in an azeotropic formulation with trans-1,2-dichloroethylene and ethanol. Its increased solvency and low surface tension, as well as nonflammability and constant composition during boiling, make it ideal for immersion defluxing and degreasing applications. In addition, the ethanol component of 71DA fluid provides enhanced removal of ionic contaminants. 71DA fluid is non-ozone-depleting, has a low global warming potential and a short atmospheric lifetime. It is low in toxicity and is listed as "acceptable without restrictions" under the U.S. EPA's Significant New Alternatives Policy (SNAP) program.

Cleaning Fluids Technical Data Sheet

3M™ Fluorinert™ Electronic Liquid FC-43 A unique combination of properties makes Fluorinert liquid FC- 43 ideal for many electronics applications, including heat transfer, vapor phase reflow soldering, and many electronic quality and reliability tests. Application Guide Listed below are key applications for FC-43.

Vapor Phase Reflow Soldering Fluids

3M™Novec™ 71DE Engineered Fluid A true azeotrope, Novec fluid 71DE has constant liquid and vapor composition at its boiling point. It is intended to replace ozone-depleting materials chlorinated and brominated solvents in medium-duty cleaning and degreasing applications. Application Guide Listed below are key applications for 71DE. Novec fluid 71DE is an excellent cleaning, rinsing and drying agent. Its increased solvency, low surface tension, nonflammability and constant composition during boiling make it ideal for immersion and vapor degreasing, and for medium-duty cleaning of soils such as oils, greases and waxes. What's more, 71DE fluid is low in toxicity, non-ozone- depleting, has a low global warming potential, and is listed as "acceptable without restrictions" under the U.S. EPA's Significant New Alternatives Policy (SNAP) program.

Cleaning Fluids Technical Data Sheet

3M™ Fluorinert™ Electronic Liquid FC-43 A unique combination of properties makes Fluorinert liquid FC- 43 ideal for many electronics applications, including heat transfer, vapor phase reflow soldering, and many electronic quality and reliability tests. Application Guide Listed below are key applications for FC-43.

Heat Transfer Fluids

Vapor Phase Reflow Soldering Fluids

3M™Novec™ 71IPA Engineered Fluid This fluid is ideal for light cleaning and degreasing tasks. A true azeotrope, 71IPA has essentially constant vapor and liquid composition at its boiling point. Application Guide Listed below are key applications for 71IPA. Novec fluid 71IPA is a hydrofluoroether in an azeotropic formulation with isopropanol. The fluid is intended to replace ozone-depleting materials like CFC-113 and HCFC-141b in many applications, including many light- duty cleaning applications. Its increased polar solvency and low surface tension, nonflammability and constant composition during boiling of the fluid makes it ideal for precision specialty cleaning and rinsing for removal of particulate, fingerprints and light soils from metal, plastic and glass parts.

Cleaning Fluids Technical Data Sheet

3M™ Fluorinert™ Electronic Liquid FC-43 A unique combination of properties makes Fluorinert liquid FC- 43 ideal for many electronics applications, including heat transfer, vapor phase reflow soldering, and many electronic quality and reliability tests. Application Guide Listed below are key applications for FC-43.

Heat Transfer Fluids

Vapor Phase Reflow Soldering Fluids

3M™Novec™ 7000 Engineered Fluid 7000 is pumpable to -120 °C; is nonflammable; and is not regulated for transport or use. This product is used in a diverse range of industries. Its unique properties make it useful as a low temperature, heat transfer medium and as a refrigerant. Application Guide Listed below are key applications for 7000DL. This property makes it useful as a heat transfer liquid for cooling reactors in the pharmaceutical and chemical processing industries. In the semiconductor industry, it is ideal for automated test equipment (ATE) and wafer processing equipment which requires extreme low temperatures. It has also been used as an autocascade refrigerant. Novec fluid 7000 has a very low global warming potential (GWP) and offers reduced greenhouse gas emissions when compared to PFCs - without sacrificing performance. • Non-flammable • Low Global Warming Potential (GWP)

Additional Information Technical Data Sheet

Heat Transfer Fluids

Features and Benefits

3M™ Fluorinert™ Electronic Liquid FC-43 A unique combination of properties makes Fluorinert liquid FC- 43 ideal for many electronics applications, including heat transfer, vapor phase reflow soldering, and many electronic quality and reliability tests. Application Guide Listed below are key applications for FC-43.

Heat Transfer Fluids

Testing Fluids

3M™Novec™ 7100 Engineered Fluid Novec fluid 7100 is used in a diverse range of industries. Its convenient boiling point and excellent environmental, health and safety profile make it useful in applications like heat transfer, cleaning, lubricant deposition and more. Application Guide Listed below are key applications for 7100. Used to replace CFCs, HFCs, HCFCs and flammable solvents in fingerprint formulations for ninhydrin or DFO, 7100 works in the formula to provide optimally crisp ridge detail. 7100s high wetting index assures maximum penetration and delivery of the ninhydrin or DFO to deposited amino acids, thus finding and developing more prints than other formulations. And 7100 is compatible with a wide range of inks, papers and materials thus protecting the evidence from damage and blurred inks. Additional characteristics of 7100 include low toxicity, zero ozone depletion potential, low global warming potential and the solvent is nonflammable. Its boiling point (61°C) and increased solvency make Novec fluid 7100 an ideal cleaning solvent in applications like vapor degreasing, wet cleaning and FOUP cleaning. Low surface tension helps it to penetrate into tight spaces found in delicate electronic equipment - providing a thorough and complete clean. 7100 is non-ozone depleting, is not a volatile organic compound (VOC) and is approved without restrictions under the US EPA's Significant New Alternatives Program (SNAP) Depending on the type of soil to be cleaned, Novec fluid 7100 can be used "neat" or in combination with other solvents. The product is compatible with most metals, plastics and elastomers. Low viscosity and low surface tension provide this fluid with surface wetting and flow properties similar to 3M™ Performance Fluid PF-5060DL. In addition, Novec fluid 7100 has a short atmospheric lifetime and low global warming potential (GWP). Novec fluid 7100 delivers good solvency for PFPE lubricants and can dissolve high performance lubricant additives such as X-1P. A wide liquid range (-135°C to 61°C) makes Novec fluid 7100 well-suited to thermal management applications in a wide array of industries. In the semiconductor industry, it's ideal for automated test equipment (ATE) and wafer processing equipment requiring low temperatures. Novec fluid 7100 has a very low global warming potential (GWP) and offers reduced greenhouse gas emissions when compared to PFCs - without sacrificing performance.

Carrier Solvents for Fingerprint Formulations Technical Data Sheet

Heat Transfer Fluids

Cleaning Fluids

Heat Transfer Fluids

Deposition Solvents

Heat Transfer Fluids

3M™ Fluorinert™ Electronic Liquid FC-43 A unique combination of properties makes Fluorinert liquid FC- 43 ideal for many electronics applications, including heat transfer, vapor phase reflow soldering, and many electronic quality and reliability tests. Application Guide Listed below are key applications for FC-43.

Heat Transfer Fluids

Vapor Phase Reflow Soldering Fluids

3M™Novec™ 7100DL Engineered Fluid A higher purity version of Novec fluid 7100, Novec fluid 7100DL is tightly-controlled for ions, metals and non-volatile residue. It is used in cleaning and deposition applications when high-purity materials are needed. Application Guide Listed below are key applications for 7000DL. Its boiling point (61°C) and increased solvency make Novec fluid 7100DL an ideal cleaning solvent in applications like vapor degreasing, wet cleaning and FOUP cleaning. Low surface tension helps it penetrate into tight spaces found to provide a thorough and complete clean, and its high purity helps to meet the increasing demands of the electronics industry. It is a good solvent replacement for CFCs, HCFCs, HFCs and chlorinated solvents. 7100DL is non-ozone depleting, is not a volatile organic compound (VOC) and is approved without restrictions under the US EPA's Significant New Alternatives Program (SNAP). Depending on the type of soil to be cleaned, Novec fluid 7100DL can be used "neat" or in combination with other solvents. The product is compatible with most metals, plastics and elastomers. 7100DL has been specially formulated for disk lube deposition. Low viscosity and low surface tension provide this fluid with surface wetting and flow properties similar to 3M™ Performance Fluid PF-5060DL. Novec fluid 7100DL has a short atmospheric lifetime and low global warming potential (GWP). Novec fluid 7100DL delivers good solvency for PFPE lubricants and can dissolve high performance lubricant additives such as X-1P. What's more, the fluid is an excellent choice for pre- cleaning of disks prior to lubrication deposition.

Cleaning Fluids Technical Data Sheet

Heat Transfer Fluids

Deposition Solvents

3M™ Fluorinert™ Electronic Liquid FC-43

3M™Novec™ 71D90 Engineered Fluid The excellent solvency of 71D90 makes it an ideal replacement for HCFC-141b in many aerosol cleaners. Technical Data Sheet

3M™ Fluorinert™ Electronic Liquid FC-43 A unique combination of properties makes Fluorinert liquid FC- 43 ideal for many electronics applications, including heat transfer, vapor phase reflow soldering, and many electronic quality and reliability tests. Application Guide Listed below are key applications for FC-43.

Heat Transfer Fluids

Testing Fluids

3M™Novec™ 7200 Engineered Fluid Its 76°C boiling point and excellent environmental, health and safety profile make Novec fluid 7200 useful in applications like heat transfer, cleaning, lubricant deposition and more, in a diverse range of industries. Application Guide Listed below are key applications for 7200. Its higher boiling point (76°C) and increased solvency make Novec fluid 7200 an ideal cleaning solvent in applications like vapor degreasing, wet cleaning and FOUP cleaning. Its solvency allows its use in cleaning light-duty soils - like particulates, fluorolubes, light oils and fluoropolymers - and it can be paired with co-solvents to clean heavier-duty soils. 7200 is non-ozone depleting, is not a volatile organic compound (VOC) and is approved without restrictions under the US EPA's Significant New Alternatives Program (SNAP). Low viscosity and low surface tension provide this fluid with surface wetting and flow properties similar to 3M™ Performance Fluid PF-5060DL. Novec fluid 7200 has a short atmospheric lifetime and low global warming potential (GWP). Novec fluid 7200 can dissolve lubricants as well as PFPE lubes. In addition, Novec fluid 7200 offers certain unique process advantages because its higher boiling point reduces evaporative losses and its lower density means that it takes less fluid to fill a lubing machine. A wide liquid range (-138°C to 76°C) makes Novec fluid 7200 well-suited to thermal management applications in a wide array of industries. In addition, 7200 fluid has a very low global warming potential (GWP) and offers reduced greenhouse gas emissions when compared to PFCs - without sacrificing performance.

Cleaning Fluids Technical Data Sheet

Heat Transfer Fluids

Deposition Solvents

Heat Transfer Fluids

3M™ Fluorinert™ Electronic Liquid FC-43 A unique combination of properties makes Fluorinert liquid FC- 43 ideal for many electronics applications, including heat transfer, vapor phase reflow soldering, and many electronic quality and reliability tests. Application Guide Listed below are key applications for FC-43.

Heat Transfer Fluids

Testing Fluids

3M™Novec™ 7200DL Engineered Fluid Its 76°C boiling point and excellent environmental, health and safety profile make Novec fluid 7200 useful in applications like heat transfer, cleaning, lubricant deposition and more, in a diverse range of industries. Application Guide Listed below are key applications for 7200. Its higher boiling point (76°C) and increased solvency make Novec fluid 7200 an ideal cleaning solvent in applications like vapor degreasing, wet cleaning and FOUP cleaning. Its solvency allows its use in cleaning light-duty soils - like particulates, fluorolubes, light oils and fluoropolymers - and it can be paired with co-solvents to clean heavier-duty soils. 7200 is non-ozone depleting, is not a volatile organic compound (VOC) and is approved without restrictions under the US EPA's Significant New Alternatives Program (SNAP). Low viscosity and low surface tension provide this fluid with surface wetting and flow properties similar to 3M™ Performance Fluid PF-5060DL. Novec fluid 7200 has a short atmospheric lifetime and low global warming potential (GWP). Novec fluid 7200 can dissolve lubricants as well as PFPE lubes. In addition, Novec fluid 7200 offers certain unique process advantages because its higher boiling point reduces evaporative losses and its lower density means that it takes less fluid to fill a lubing machine. A wide liquid range (-138°C to 76°C) makes Novec fluid 7200 well-suited to thermal management applications in a wide array of industries. In addition, 7200 fluid has a very low global warming potential (GWP) and offers reduced greenhouse gas emissions when compared to PFCs - without sacrificing performance.

Cleaning Fluids Technical Data Sheet

Heat Transfer Fluids

Deposition Solvents

Heat Transfer Fluids

3M™ Fluorinert™ Electronic Liquid FC-43 A unique combination of properties makes Fluorinert liquid FC- 43 ideal for many electronics applications, including heat transfer, vapor phase reflow soldering, and many electronic quality and reliability tests. Application Guide Listed below are key applications for FC-43.

3M™Novec™ 72DA Engineered Fluid Novec fluid 72DA is a blend of azeotropes designed for medium to heavy-duty cleaning of solder flux residue. The high solvency and low toxicity make it an ideal replacement for ozone- depleting compounds, hydrofluorocarbons, chlorinated solvents, and n-propyl bromide in many applications. Application Guide Listed below are key applications for 72DA. Novec fluid 72DA is ideal for a wide range of electronics cleaning applications. It is intended to replace CFCs, HCFCs, HFCs, nPB and chlorinated solvents. This Novec product has zero ozone depletion potential and other favorable environmental, health and safety properties. 72DA fluid is listed as "acceptable without restrictions" under the U.S. EPA's Significant New Alternatives Policy (SNAP) program.

Additional Information Technical Data Sheet

3M™ Fluorinert™ Electronic Liquid FC-43 A unique combination of properties makes Fluorinert liquid FC- 43 ideal for many electronics applications, including heat transfer, vapor phase reflow soldering, and many electronic quality and reliability tests. Application Guide Listed below are key applications for FC-43.

3M™Novec™ 72DE Engineered Fluid Novec fluid 72DE is a blend of azeotropes intended for medium to heavy duty cleaning and degreasing applications. The high solvency and low toxicity make it an ideal replacement for ozone-depleting compounds, chlorinated solvents, and n-propyl bromide in many applications. Application Guide Listed below are key applications for 72DE. Novec fluid 72DE is an excellent cleaning agent. Its increased solvency, low surface tension, nonflammability and stability make it ideal for vapor degreasing applications. It is intended for medium to heavy-duty cleaning of soils such as oils, greases and waxes. 72DE fluid is low in toxicity, non-ozone-depleting, has a low global warming potential, and is listed as "acceptable without restrictions" under the U.S. EPA's Significant New Alternatives Policy (SNAP) program.

Cleaning Fluids Technical Data Sheet

3M™ Fluorinert™ Electronic Liquid FC-43 A unique combination of properties makes Fluorinert liquid FC- 43 ideal for many electronics applications, including heat transfer, vapor phase reflow soldering, and many electronic quality and reliability tests. Application Guide Listed below are key applications for FC-43.

3M™Novec™ 7300 Engineered Fluid Novec 7300 fluid is a clear, colorless, odorless fluid that has utility in a wide variety of applications, including heat transfer, lubricant deposition, electronic testing and cleaning applications. A nonflammable, segregated hydrofluoroether, Novec 7300 fluid is low in toxicity, non-ozone depleting and has low global warming potential. Application Guide Listed below are key applications for 7300. • Clear, colorless, odorless fluid • Non-flammable • Low in toxicity • Non-ozone depleting • Low Global Warming Potential (GWP)

Features and Benefits Technical Data Sheet

3M™ Fluorinert™ Electronic Liquid FC-43 A unique combination of properties makes Fluorinert liquid FC- 43 ideal for many electronics applications, including heat transfer, vapor phase reflow soldering, and many electronic quality and reliability tests. Application Guide Listed below are key applications for FC-43.

3M™Novec™ 7300DL Engineered Fluid Novec 7300 fluid is a clear, colorless, odorless fluid that has utility in a wide variety of applications, including heat transfer, lubricant deposition, electronic testing and cleaning applications. A nonflammable, segregated hydrofluoroether, Novec 7300 fluid is low in toxicity, non-ozone depleting and has low global warming potential. Application Guide Listed below are key applications for 7300. • Clear, colorless, odorless fluid • Non-flammable • Low in toxicity • Non-ozone depleting • Low Global Warming Potential (GWP)

Features and Benefits Technical Data Sheet

3M™ Fluorinert™ Electronic Liquid FC-43 A unique combination of properties makes Fluorinert liquid FC- 43 ideal for many electronics applications, including heat transfer, vapor phase reflow soldering, and many electronic quality and reliability tests. Application Guide Listed below are key applications for FC-43.

3M™Novec™ 7500 Engineered Fluid High performance Novec fluid 7500 shares many of the inertness and dielectric properties of perfluorinated fluids, and offers a superior environmental profile. It is finding use in heat transfer and cleaning applications. Application Guide Listed below are key applications for 7500. Because of its extremely low global warming potential (GWP) and wide liquid range (-100°C to 130°C), Novec fluid 7500 can help wafer fabs meet voluntary emission reduction goals. The fluid can be used in a wide range of thermal management applications, including: • Ion implanters • Dry etchers • CVD/PECVD tools • Automated test equipment (ATE) • Electronic component testing and calibration • Reactors • Freeze dryers • Fuel cells

Heat Transfer Fluids Technical Data Sheet

3M™ Fluorinert™ Electronic Liquid FC-43 A unique combination of properties makes Fluorinert liquid FC- 43 ideal for many electronics applications, including heat transfer, vapor phase reflow soldering, and many electronic quality and reliability tests. Application Guide Listed below are key applications for FC-43.

3M™Novec™ 7600 Engineered Fluid 3M™ Novec™ 7600 Engineered Fluid is a fluid with low global warming potential designed for use in heat transfer applications. Novec 7600 fluid shares many of the inertness and dielectric properties of perfluorocarbons (PFCs) and perfluoropolyethers (PFPEs), and is a viable option for replacing them in a wide array of applications. Application Guide Listed below are key applications for 7600. • Low Global Warming Potential (GWP) • Designed for use in heat transfer applications • Viable option to replace perfluorocarbons (PFCs) and perfluoropolyethers (PFPEs)

Features and Benefits Technical Data Sheet

3M™ Fluorinert™ Electronic Liquid FC-43

3M™Novec™ 8200 Engineered Fluid 8200 is intended to replace 1,1,1-trichloroethane and perchloroethylene in many film cleaning applications. Technical Data Sheet

3M™ Fluorinert™ Electronic Liquid FC-43

3M™ Performance Fluid PF-5052 PF-5052 is a replacement for ozone depleting substances used as an additive for solvent and foam blowing applications. 3M™ Performance Fluid PF-5052 is a clear, colorless, fully- fluorinated liquid ideal for use in medium temperature range heat transfer applications. Like other 3M Performance Fluids, PF-5052 fluid is chemically and thermally stable, practically non-toxic, and nonflammable. The unique solvent properties of PF-5052 fluid also make this an ideal solvent for depositing or removing fluorinated oils and lubricants. Application Information 3M offers a line of fluorochemical deposition solvents. For disk drives, these solvents are used for deposition of perfluoropolyether lubricants as well as lubricant additives. In the line, you'll find advantages for worker safety and environmental acceptability, as well as the following product attributes: selective solvency; low water solubility; good materials compatibility; and reduced evaporation losses. Technical Data Sheet

3M™ Fluorinert™ Electronic Liquid FC-43

3M™ Performance Fluid PF-5056 PF-5056 applications include foam blowing dielectric medium for linemen sleeve testing, and particulate removal solvent. 3M™ Performance Fluid PF-5056 is a blend of clear, colorless, fullyfluorinated liquids. Like other 3M Performance Fluids, PF- 5056 fluid is chemically and thermally stable, practically non- toxic and nonflammable. High dielectric strength and excellent materials compatibility make PF-5056 fluid an effective alternative to chlorofluorocarbons (CFCs) in a wide range of applications, from lubricant deposition to low temperature cooling to process solvent applications. Technical Data Sheet

3M™ Fluorinert™ Electronic Liquid FC-43

3M™ Performance Fluid PF-5060 PF-5060 is a replacement for ozone depleting substances used in solvent applications. 3M™ Performance Fluid PF-5060 is a clear, colorless, fully- fluorinated liquid. Like other 3M Performance Fluids, PF-5060 fluid is chemically and thermally stable, practically non-toxic, and nonflammable. The high dielectric strength, excellent materials compatibility, and chemical and thermal stability make PF-5060 fluid useful in a wide range of applications, such as lubricant deposition, reaction media and heat transfer. Technical Data Sheet

3M™ Fluorinert™ Electronic Liquid FC-43

3M™ Performance Fluid PF-5060DL This high performance fluid is designed specifically to meet the increasing demands of the electronics industry and is tightly- controlled for ions, metals and non-volatile residue. It is used in hard disk lubrication and cleaning applications. 3M™ Performance Fluid PF-5060DL is a high-purity version of 3M™ Performance Fluid PF-5060. Product specifications were recently tightened to meet the increasing performance demands of the electronics industry. These specifications include ions, metals and non-volatile residue. 3M fluid PF-5060DL has been the industry standard for lubricant deposition on hard disks since ozone-depleting CFCs were regulated out of use. PF-5060DL fluid has a zero ozone depletion potential and is exempt from VOC regulations. It is a more effective solvent for depositing PTFE lubricants because it dissolves only the lubricant and essentially no water or hydrocarbons. Low viscosity and surface tension provide PF-5060DL fluid with excellent surface wetting and flow. Technical Data Sheet

3M™ Fluorinert™ Electronic Liquid FC-43

3M™ Performance Fluid PF-5070 PF-5070 is a replacement for ozone depleting substances used in solvent applications. 3M™ Performance Fluid PF-5070 is a clear, colorless, fully- fluorinated liquid. Like other 3M Performance Fluids, PF-5070 fluid is chemically and thermally stable, practically non-toxic, and nonflammable. The high dielectric strength, excellent materials compatibility, and chemical and thermal stability make PF-5070 fluid useful in a wide range of applications, such as lubricant deposition, reaction media and heat transfer. Technical Data Sheet

3M™ Fluorinert™ Electronic Liquid FC-43

3M™ Performance Fluid PF-5058 PF-5058 is a replacement for ozone depleting substances used as in heat transfer and solvent applications. 3M™ Performance Fluid PF-5058 is a blend of clear, colorless, fullyfluorinated liquids. Like other 3M Performance Fluids, PF- 5058 fluid is chemically and thermally stable, practically non- toxic and nonflammable. High dielectric strength and excellent materials compatibility make PF-5058 fluid an effective alternative to chlorofluorocarbons (CFCs) in a wide range of applications, from lubricant deposition to process solvent applications. Technical Data Sheet

3M™ Novec™ Contact Cleaner 3M™ Novec™ Contact Cleaner effectively removes fluorinated oils and greases, light oils and silicones, dust and particulates from sensitive electrical and electronic equipment, including connectors, printed circuit boards, electro-mechanical devices, scales, contacts, relays, switches, instrumentation and circuit breakers. Novec Contact Cleaner is compatible with plastics and other materials of construction. Based on proprietary 3M solvent technology, it is non-flammable, non-ozone depleting and contains no HCFCs, HFCs, nPB or HAPs. • Fast drying, low odor • Non-flammable • Excellent plastics compatibility • Low toxicity • No rinsing and no residues • Non-chlorinated • Non-corrosive, non-conductive – ideal for electrical or energized components • Exempt from the U.S. EPA’s volatile organic compound (VOC) regulations Technical Data Sheet

3M™ Novec™ Electronic Degreaser 3M™ Novec™ Electronic Degreaser is ideal for cleaning heavy oils, greases and handling soils from electronic and electrical equipment. This heavy-duty cleaner is suitable for use on metals and many plastics, with the exception of acrylics, polycarbonates, ABS and PS. Novec Electronic Degreaser is non-flammable, non-ozone depleting, has low global warming ptential and does not contain any hydrochlorofluorocarbons (HCFCs), hydrofluorocarbons (HFCs), hazardous air pollutants (HAPs) or n-propyl bromide (nPB). This product is formulated with 3M™ Novec™ 7200 Engineered Fluid, which is VOC-exempt under California Air Resources Board (CARB) regulations. Novec Electronic Degreaser is optimized for both compliance with the CARB VOC limits and high performance because it does not resort to increased use of inert propellants (dilution) in order to achieve compliance. • Non-corrosive • Non-flammable • Low toxicity • Fast drying, no residue • Non-ozone depleting • Low Global Warming Potential • Low odor Technical Data Sheet

3M™ Novec™ Flux Remover 3M™ Novec™ Flux Remover uses advanced 3M solvent technology to remove a wide variety of solder fluxes used in electronics manufacturing and repair – including rosin-based and many no-clean and lead-free fluxes. Novec Flux Remover evaporates quickly, and leaves no residue. This industrial- strength cleaner is non-corrosive and compatible with most plastics, with the exception of acrylics, polycarbonates, ABS and PS. Novec Flux Remover is non-flammable, non-ozone depleting, has low global warming potential and does not contain any hydrochlorofluorocarbons (HCFCs), hydrofluorocarbons (HFCs), hazardous air pollutants (HAPs) or n-propyl bromide (nPB). This product is formulated with 3M™ Novec™ 7200 Engineered Fluid, which is VOC-exempt under California Air Resources Board (CARB) regulations. Novec Flux Remover is optimized for both compliance with the CARB VOC limits and high performance because it does not resort to increased use of inert propellants (dilution) in order to achieve compliance. • Non-corrosive • Non-flammable • Low toxicity • Fast drying, no residue • Non-ozone depleting • Low Global Warming Potential • Low odor Technical Data Sheet